Rockwell Automation 2711P-xxxx PanelView Plus 6 Terminals User Manual - Manual (Page 25)

Rockwell Automation Publication 2711P-UM006C-EN-P - April 2013 25
Overview Chapter 1
Table 22 - Function Key Legend Kits
Cat. No. Terminal Model
(1)
(1) Applies to keypad and keypad/touch-screen terminals.
Description
2711P-RFK6 600 keypad
Blank legend inserts and software
2711P-RFK7 700 keypad
2711P-RFK10 1000 keypad
2711P-RFK12 1250 keypad
2711P-RFK15 1500 keypad
Table 23 - Mounting Hardware
Cat. No. Terminal Model Description Quantity
2711P-RTFC 400 or 600 Replacement mounting levers 8
2711P-RTMC 700 to 1500 Replacement Mounting clips 8
Table 24 - Replacement Battery
Cat. No. Terminal Model Description
2711P-RY2032 All terminals Replacement CR2032 coin-cell equivalent battery
Table 25 - Cables
Cat. No. Terminal Model Description Length
2711C-CBL-UU02 700 to 1500 Programming cable that connects the USB device port of
the terminal to a USB host port of a computer 2 m (6.5 ft)
6189V-USBCBL2 400 and 600 Programming cable that connects the USB device port of
the terminal to a USB host port of a computer 1.8 m (6 ft)
Table 26 - Power Supply and Power Terminal Blocks
Cat. No. Terminal Model Description Quantity
2711P-RSACDIN All terminals DIN-rail power supply, AC-to-DC, 85…265V AC, 47…63 Hz 1
2711P-RVAC 400 and 600 AC power terminal block 10
2711P-6RSA AC module converts a DC-powered terminal to AC power 1
2711-TBDC DC power terminal block 10
2711P-RTBAC3 700 to 1500 AC power terminal block 10
2711P-RTBDC2 DC power terminal block 10
Table 27 - Bezel Replacements
Cat. No. Terminal Model
Operator Input
Keypad Touch Key/Touch
2711P-RBK7
700
•
2711P-RBT7 •
2711P-RBB7 •