Configured terminals – Rockwell Automation 2711P-xxxx PanelView Plus 6 Terminals User Manual User Manual
Page 18

18
Rockwell Automation Publication 2711P-UM006C-EN-P - April 2013
Chapter 1
Overview
Configured Terminals
A configured terminal, ordered as a single-catalog number, has a display module
and logic module.
An optional DH+/DH-485, ControlNet, or Ethernet communication module
can be added later for additional network capabilities.
1
2
3
4
5
6
7
8
10
9
Table 8 - Logic Module Features
Item
Feature
1
Network interface connector for optional communication module
2
AC or DC power input
(1)
• Isolated 18…32V DC
• 85…264V AC
(1) For DC applications using AC power, an external, remote AC-to-DC power supply, cat. no. 2711P-RSACDIN, is
available for DIN-rail mounting.
3
Ethernet port for controller communication, 10/100 BaseT, Auto MDI/MDI-X
4
RS-232 serial port for file transfers, printing, and controller communication
5
Two USB 2.0 high-speed (type A) host ports for attaching USB devices including mouse,
keyboard, printer, and USB drives that are hot-swappable in nonhazardous locations
6
One USB 2.0 high-speed (type mini- B) device port for connecting a host computer
7
Reset switch to reset the terminal without having to power on and off
8
Default switch to access maintenance operations such as restoring factory defaults
9
Indicators provide communication and fault status
10
Secure Digital (SD) card slot supporting cat. no. 1784-SDx cards