Usb ports – Rockwell Automation 2711P-xxxx PanelView Plus 6 Terminals User Manual User Manual
Page 138
138
Rockwell Automation Publication 2711P-UM006C-EN-P - April 2013
Chapter 6
Terminal Connections
USB Ports
The terminals have one or two USB 2.0 host ports and one USB 2.0 device port.
Figure 14 - USB Ports
USB Host Port
USB Device Port
Mini USB Device Port
USB Host Ports
700 to 1500 Terminal
400 or 600 Terminal
IMPORTANT
The USB host and device ports are intended only for temporary use and must
not be used for runtime operations.
Table 61 - USB Device Support
USB Port Type
Supported USB Devices
Tips
Host Ports (type A)
• Keyboard or mouse, HID devices with
native device drivers
• USB flash drives for external storage
• Supported printers
• Cameras, modems, and bar code
readers
For a list of compatible devices, go to:
and search the Knowledgebase for ID 115072.
USB flash drive volumes are named USB Storage,
USB Storage2,... USB flash drive partitions are
managed by Storage Manager in the Control Panel.
Device Port
(Type B or mini-B)
Host computer with the USB remote
RNDIS network deice driver installed.
For details on how to install the USB remote NDIS
driver on a computer and configure the terminal for
the USB connection, go to
and search the Knowledgebase for ID 115608.
IMPORTANT
for information on using the USB host ports and USB
peripheral devices in hazardous locations.