Rockwell Automation 1785-Vx0B, D17856.5.9 PLC-5 VME VMEbus Programmable Controllers User Manual - Manual (Page 8)

Summary of Changes
vii
Summary of Changes
This release of the PLC-5/VME VMEbus Programmable Controllers User
Manual contains new and updated information on PLC-5/VME
t systems.
For infornmation about: See chapter/appendix:
CE compliance 2
making VME self-references in POST tests 2
improved .WRDY and .LOCK bit description 3
changes to the status file 4
setting the NOCV bit to 0 7
revised specifications C
additional troubleshooting tips D
To help you find new and updated information in this release of the
manual, we have included change bars as shown to the left of
this paragraph.
In addition to the new and updated information discussed above, we have
altered the way we reference software documentation in this manual.
Rather than show specific screens and key sequences which may vary
according to the software package you are using, we refer you instead to
the programming software documentation that accompanies your particular
software package. Of course, we still provide the basic background
information you need to accomplish your programming tasks, but if you
have specific questions, you should refer to your programming software
documentation set.