Rockwell Automation 1785-Vx0B, D17856.5.9 PLC-5 VME VMEbus Programmable Controllers User Manual - Manual (Page 273)

Index I–4
Programming terminal
cable connections, E-7
direct connection, 2-12
modem, E-1
serial connection, 2-14
Programs, example, A-1
R
Read bytes physical, 6-26
Read-modify-write, 6-8
REM. See Keyswitch operation
Remote I/O
cable lengths, 2-6
connecting link to PLC-V5 processor,
2-6
making connections, 2-7
terminating the link, 2-9
remote I/O chassis, defined, iv
remote I/O link, defined, iv
Response word error codes, 5-8 , D-3
Restore port configuration, 6-32
Return edit resource, 6-30
RUN. See Keyswitch operation
S
sample programs
COMMON.C, B-5
COMMON.H, B-3
DOWNLOAD.CPP, A-27
DOWNLOAD.MAK, A-34
P40VAPC.C, B-47
P40VAPC.H, B-46
P40VCCO.C, B-18
P40VCCO.H, B-17
P40VDLA.C, B-53
P40VDLA.H, B-52
P40VDLC.C, B-56
P40VDLC.H, B-55
P40VECHO.C, B-59
P40VECHO.H, B-58
P40VGER.C, B-62
P40VGER.H, B-61
P40VHINT.C, B-33
P40VHINT.H, B-32
P40VIHAS.C, B-67
P40VIHAS.H, B-64
P40VRBP.C, B-70
P40VRBP.H, B-69
P40VRER.C, B-73
P40VRER.H, B-72
P40VRMW.C, B-76
P40VRMW.H, B-75
P40VRPC.C, B-81
P40VRPC.H, B-80
P40VSCM.C, B-84
P40VSCM.H, B-83
P40VSPCC.C, B-40
P40VSPCC.H, B-39
P40VULA.C, B-87
P40VULA.H, B-86
P40VULC.C, B-50
P40VULC.H, B-49
P40VWBP.C, B-44
P40VWBP.H, B-43
PCCC.H, B-30
UPLOAD.CPP, A-15
UPLOAD.MAK, A-26
VMEDEMO.CPP, A-2
VMEDEMO.MAK, A-13
scanning
discrete-transfer data
to processor-resident I/O, 7-12
to remote I/O, 7-12
introduction to, 7-7
Send-PCCC command, 5-7
Serial port
cables, E-6
connecting a programming terminal,
2-14
Set CPU mode, 6-20
Specifications
environmental, C-1
processor, C-3
VMEbus, C-2
Status Bits, 4-6
Status codes, D-3
Supported PCCCs, 6-3
SW1 switch, 2-3
SW1, station numbers, 2-3
SW2 switch, 2-3
SW2, address range, 2-4
Switch
SW1, 2-3
SW2, 2-3
Switches location, 2-2
System Description
basic configuration, 1-5
PLC-V5 processor, 1-4
System description, 1-4