Rockwell Automation 1785-Vx0B, D17856.5.9 PLC-5 VME VMEbus Programmable Controllers User Manual - Manual (Page 271)

Index I–2
device-type register, 3-5
eight configuration register structure,
3-4
ID register, 3-5
offset register, 3-6
status/control register, 3-5
Connecting to I/O, 2-6
Connectors, remote I/O, 2-8
Continuous copy error codes, 4-11 , 5-4
Continuous-copy commands, 5-2
Copy operation, notes, 5-3
Copy synchronization, 5-4
CPU based driver examples, A-1
D
Daisy-chain connection, 2-8
Daisy–chain connection, 2-13
Descriptions, header bit/byte, 6-4
DH+
daisy–chain connection, 2-13
direct connect, 2-12
trunkline/dropline connection, 2-13
discrete-transfer data
defined, iv
timing, 7-12
Download all request, 6-23
Download complete, 6-25
DOWNLOAD.CPP, sample, A-27
DOWNLOAD.MAK, sample, A-34
E
Echo, 6-5
EEPROM, 1-3
Electrostatic discharge, 2-2
Environmental specifications, C-1
Error codes, VME status file, 5-5
example of PLC-5/VME processors, front
view, 1-2
Extended-local I/O, link termination, 2-11
F
Features, 1-1
Front panel, E-2
LEDs, D-1
Front view, 1-2
G
Get edit resource, 6-29
Grounding, 2-5
H
Handle-interrupts command, 5-5
Header bit/byte descriptions, 6-4
I
I/O housekeeping, 7-11
I/O, connecting, 2-6
Identify host and some status, 6-6
immediate I/O, 7-12 , 7-14
Insertion into a system, 2-5
Installation, 2-1
connecting to I/O, 2-6
grounding, 2-5
insertion into a system, 2-5
processor configuration, 2-2
SW1, station numbers, 2-3
SW2, address range, 2-4
switches location, 2-2
VME backplane jumpers, 2-4 , D-1
Instruction set, 1-3
Interface, VMEbus, 1-6
interrupts, effects on scan time, 7-10
K
keyswitch, operation, 1-3
L
Ladder Messages, 4-1
Check VME status file, 4-2 , 4-5
Copy from VME, 4-2 , 4-4
Copy to VME, 4-2 , 4-3
Send VME interrupt, 4-2 , 4-5
Ladder Program Interfaces, 4-1
logic scan. See program scan
M
Message Completion, 4-6
Message Completion and Status Bits,
4-6
Messages, ladder, 4-1