Rockwell Automation 1785-Vx0B, D17856.5.9 PLC-5 VME VMEbus Programmable Controllers User Manual - Manual (Page 49)

Chapter 4
Ladder-Program Interfaces
4-2
Table 4.A
Four Ladder Messages
Message ASCII Syntax Page
Copy to VME CTV # X f : e vmeaddr width numelts 4-3
Copy from VME CFV vmeaddr width # X f : e numelts 4-4
Send VME interrupt SVI vmeint statid 4-5
Check VME status file CSF 4-5
where:
X is the file type.
File Type Words per Element
counter C 3
floating point F 2
input I 1
integer N 1
output O 1
control R 3
status S 1
timer T 3
ASCII A 1
BCD D 1
f is the file number—0 is the output image; 1 is the input
image; 2 is the status file; and 3-999 are any type except
input, output, and status files.
If the X file type is I, O, or S, the f parameter is optional.
e is the element number—0-192 octal for I/O files, 0-127
decimal for the status file, 0-999 decimal for all other files.
vmeaddr is the A16 or A24 VME address. A 6-character hexadecimal
number denotes an A24 address, which generates a 3D
address modifier. A 4-character hexadecimal number denotes
an A16 address, which generates a 2D address modifier on
the VMEbus.