Rockwell Automation 1785-Vx0B, D17856.5.9 PLC-5 VME VMEbus Programmable Controllers User Manual - Manual (Page 220)

Sample API Modules
Appendix B
B-62
#include
#include
#include
#include ”epc_obm.h”
#include ”epc_err.h”
#include ”busmgr.h”
#include ”p40vger.h”
/***************************************************************************/
/************************* PRIVATE DEFINITIONS ****************************/
/***************************************************************************/
#define kPLC540V_PCCC_GER_CMD 0x0F
#define kPLC540V_PCCC_GER_FNC 0x11
/***************************************************************************/
/************************* PRIVATE TYPE DEFINITIONS ************************/
/***************************************************************************/
/***************************************************************************/
/*************************** PRIVATE FUNCTIONS *****************************/
/***************************************************************************/
/*****************************************************************************
*
* PURPOSE: This function sends the PCCC Get Edit Resource command to the
* PLC-5/40V.
*
* INPUT: ULONG vmeCmdBlkAddr contains the VME address where the
* command block will be copied to so the PLC-5/40V can
* access its information.
*
* UWORD baseAddress contains the base address of the
* PLC-5/40V.
*
* VME_DATA_WIDTH_TYPE width contains the data width that
* should be used for the copy operations. It can be D16
* or D08.
*
* VME_ADDRESS_MODIFIER_TYPE addrMod defines the address space
* in which the VME data is accessed. It can be A16 or A24.
*
* PLC540V_PCCC_GER_RPY_TYPE reply contains PCCC’s Get Edit
* Resource command specific reply packet.
*
* OUTPUT: PLC540V_STATUS_TYPE *status will contain the final status
* of requesting this function. This status could be and EPC
* or PLC-5/40V value.
*
* RETURNS: Nothing.
*
P40VGER.C