Rockwell Automation 22-WIM-N1 DSI Wireless Interface Module - Manual (Page 83)

Using RTU Master Mode D-9
3. Select the “Remote” radio button and click Next -> to display the
Bluetooth Browser screen ( Figure D.13 ).
Figure D.13 Bluetooth Browser Screen
4. Select the drive to which the WIM is connected (for this example,
PowerFlex 40 3P 460V 1.0HP), and click OK to display the Remote
Configuration screen (
Figure D.14 ). Enter a name (for this example,
“Drive 1”) for the drive. Then set its node address (for this example,
“1”) to match the node address set with drive parameter 104 -
[Comm Node Addr].
Figure D.14 Remote Configuration Screen