Rockwell Automation 22-WIM-N1 DSI Wireless Interface Module - Manual (Page 65)

Wireless Flash Updating DSI Peripherals C-7
Figure C.13 ControlFLASH Setup Complete Screen
3. Establish wireless communication between the WIM and the desktop
or laptop computer. For this procedure, refer to Using DriveExplorer/
DriveExplorer Lite on page 3-10 .
4. With the DriveExplorer linear list screen ( Figure C.14 ) displayed,
click on the device to be flash updated (for this example, a
22-COMM-D communication adapter).
Figure C.14 DriveExplorer Linear List Screen
5. Select Explore > Device Properties… to display the device’s
information screen. Then click the Details tab to show a screen
(
Figure C.15 ) with the device’s firmware revision information.