Rockwell Automation 22-WIM-N1 DSI Wireless Interface Module - Manual (Page 47)

Chapter
4
Troubleshooting
Chapter 4 provides information to troubleshoot the WIM.
The WIM reports its operating status using a status indicator
(
Figure 4.1 ).
Figure 4.1 Status Indications of the WIM
Status Indications
Topic Page
Understanding the Status Indicator 4-1
Viewing WIM Diagnostic Items 4-3
Viewing and Clearing Events 4-4
Viewing and Clearing DF1 Communication Statistics 4-5
Understanding the Status Indicator
Status Cause Corrective Action
Off WIM is not powered.
• Securely place WIM in bezel, or
securely connect bezel or WIM cable to
the drive.
• Apply power to the drive.
Contains FCC ID: SNT-2XWIMNX
IC: 5450A-2XWIMNX
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received,
including interference that may cause undesired operation
➊
(NEMA 1 WIM shown)