Rockwell Automation 22-WIM-N1 DSI Wireless Interface Module - Manual (Page 70)

C-12 Wireless Flash Updating DSI Peripherals
Figure C.22 ControlFLASH Setup Complete Screen
3. Establish wireless communication between the WIM and the desktop
or laptop computer. For this procedure, refer to Using
DriveExecutive on page C-11 .
4. With the DriveExecutive linear list screen ( Figure C.23 ) displayed,
right-click on the device to be flash updated (for this example, a
22-COMM-D communication adapter).
Figure C.23 DriveExecutive Linear List Screen
5. Select Properties… to display the device’s general information
screen. Then click the Component Details tab to show its related
screen (
Figure C.24 ).