Rockwell Automation 22-WIM-N1 DSI Wireless Interface Module - Manual (Page 54)

A-2 Specifications
NOTE: This is a product of category C2 according to IEC 61800-3. In a
domestic environment this product may cause radio interference in
which case supplementary mitigation measures may be required.
FCC Statement of Conditions
Compliance Statement (Part 15.19)
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Environmental
Temperature
Operating
Storage 0 to 50
° C (32 to 122° F)
-40 to 85
° C (-40 to 185° F)
Relative Humidity 5 to 95% non-condensing
Atmosphere Important: The WIM must not be installed in an area where
the ambient atmosphere contains volatile or corrosive gas,
vapors or dust. If the WIM is not going to be installed for a
period of time, it must be stored in an area where it will not be
exposed to a corrosive atmosphere.
Vibration
Operating
Non-Operating 2.5G @5Hz-2KHz
5 G @5Hz-2KHz
Shock
Operating
Non-Operating 30 G peak acceleration, 11 (±1) ms pulse width
50 G peak acceleration, 11 (±1) ms pulse width
Regulatory Compliance
UL
cUL
CE
CTick
FCC ID
IC UL508C
CAN / CSA C22.2 No. 14-M91
EN50178 and EN61800-3
AS / NZS 2064, Group 1, Class A
SNT-2XWIMNX
5450A-2XWIMNX