Cardholder profiles (continued) – SDC E5 Series Access Control System User Manual
Page 20

CARDHOLDER PROFILES (Continued)
Step 2
– Import the cards from the Reader into the reference Excel file.
Go to Start > All Programs > SDC > E5 > UploadAcsCard
Select the Com Port & Terminal Address Number for
the Reader with the cards enrolled. Do not change
Baud Rate or Data Format.
Select the location and file name where the card
information will be saved. The default file name is
today’s date.
Press Upload. You will see the programming
running. After the upload is complete, press Exit.
To add a Cardholder using METHOD 2:
Step 1
– Enroll the cards into the card reader. If you have multiple readers, you may choose
any reader whose communications link has been verified:
The card number will appear on the screen as you present each card, and the AMOUNT field
will increment by one after each card. When all the cards have been enrolled, press ‘#’ to
return to the main screen.
Enter Programming
Mode
Press and Hold the ‘#” for
3 seconds
0. CHECK VERSION
1. SETUP
FUNCTION
PROCEDURE
DISPLAY WILL SHOW
Enter Setup
Enter “1”
PASSWORD:
Enter Password
Enter “1111” + “#”
1. ENROL 2. PASSWD
3. TIMER 4. SYSTEM
Select Enroll Menu
Enter “1”
1. ACCESS CARD
2. PATROL CARD
Select Access Card Menu
Enter “1”
AMOUNT: #
CARD NO.: _
Step 3
– Import the reference Excel file into the database.
Select Users
Select Cardholders Profile Setting (2-4)
Select Import Cardholder Data
Press the Open A Reference File link on the lower left.
The link opens ImportE.xls (see next page).
P:\Installation Instructions\Access Controls\INST-E5.vsd Rev C 03-13 Page:17