MacDon R85 Rotary Disc 16 Foot Pull-Type - Manual (Page 23)

SAFETY
1.9 Understanding Safety Signs
In the safety sign explanations below, (a) refers to the top or left position panel, (b) refers to the bottom or right
position of the safety decal depending on decal orientation.
NOTE: If there are more than two panels in a decal, the lettering will continue downward or to the right,
depending on decal orientation.
1. MD #113482
a. General hazard pertaining to machine operation
and servicing.
b. CAUTION
• Read the operator’s manual, and follow all
safety instructions. If you do not have a manual,
obtain one from your Dealer.
• Do not allow untrained persons to operate
the machine.
• Review safety instructions with all
Operators annually.
• Ensure that all safety signs are installed
and legible.
• Make certain everyone is clear of machine
before starting engine and during operation.
• Keep riders off the machine.
• Keep all shields in place and stay clear of
moving parts.
• Disengage mower conditioner drive,
put transmission in Neutral, and wait
for all movement to stop before leaving
operator’s position.
• Shut off engine and remove key from ignition
before servicing, adjusting, lubricating,
cleaning, or unplugging machine.
• Engage locks to prevent lowering of mower
conditioner or reel before servicing in the
raised position.
• Use slow moving vehicle emblem and flashing
warning lights when operating on roadways
unless prohibited by law.
Figure 1.26: MD #113482
169456
13
Rev. D