MacDon R85 Rotary Disc 16 Foot Pull-Type - Manual (Page 163)

MAINTENANCE AND SERVICING
Figure 8.23: Cutterbar filler plug locations
6. Clean around either filler plug (A), refer to figure 8.23:
Cutterbar filler plug locations, page 153 and remove
plug with an 8 mm hex Allen L-key.
NOTE: Rotate disc to expose filler plug
if necessary.
7. Place a suitably sized container under the cutterbar
drain hole (A).
8. Remove plug (A) with an 8 mm hex Allen L-key and
allow sufficient time for lubricant to drain.
IMPORTANT
Do NOT flush the cutterbar.
9. Safely dispose of lubricant.
10. Add lubricant as per section Filling the Cutterbar
Lubricant, page 154 .
Figure 8.24
169456
153
Rev. D