MacDon R85 Rotary Disc 16 Foot Pull-Type User Manual
Page 14
• Wear close fitting clothing and cover long hair. Never
wear dangling items such as scarves or bracelets.
• Keep all shields in place. Never alter or remove safety
equipment.
Make sure driveline guards can rotate
independently of the shaft and can telescope freely.
• Use only service and repair parts, made, or approved by
the equipment manufacturer. Substituted parts may not
meet strength, design, or safety requirements.
Figure 1.5
• Keep hands, feet, clothing, and hair away from moving
parts. Never attempt to clear obstructions, or objects,
from a machine while the engine is running.
• Do NOT modify the machine.
Non-authorized
modifications may impair machine function and/or safety.
It may also shorten the machine’s life.
• Stop engine and remove key from ignition before leaving
operator’s seat for any reason. A child or even a pet
could engage an idling machine.
Figure 1.6
• Keep the area used for servicing machinery clean
and dry. Wet or oily floors are slippery. Wet spots
can be dangerous when working with electrical
equipment. Be sure all electrical outlets and tools are
properly grounded.
• Keep work area well lit.
• Keep machinery clean.
Straw and chaff, on a hot
engine, are a fire hazard. Do NOT allow oil or grease to
accumulate on service platforms, ladders, or controls.
Clean machines before storage.
• Never use gasoline, naphtha, or any volatile material
for cleaning purposes. These materials may be toxic
and/or flammable.
• When storing machinery, cover sharp or extending
components to prevent injury from accidental contact.
Figure 1.7
169456
4
Rev. D