beautypg.com

Adding hydraulic oil: performance – MacDon R85 Rotary Disc 16 Foot Pull-Type User Manual

Page 211

background image

MAINTENANCE AND SERVICING

Adding Hydraulic Oil: Performance Upgrade Installed

Follow these steps to add oil to a hydraulic system with the performance improvement installed:

1. Clean area around hose (A) and fitting (B) on hitch.

2. Loosen the hose (A) at fitting (B).

3. Remove fitting (B).

Figure 8.118

4. Add oil through port (A) until level is approximately

1–1-1/4 in. (25–32 mm) below top face of port. Ensure
hitch is level.

Figure 8.119

5. Replace hose (A) and tighten fitting (B).

Figure 8.120

169456

201

Rev. D