MacDon R85 Rotary Disc 16 Foot Pull-Type - Manual (Page 223)

MAINTENANCE AND SERVICING
Removing Wheels: Shop Application (floor jack)
Follow these steps to raise mower conditioner for wheel removal using a floor jack under frame leg:
1. Raise mower conditioner to full height.
2. Close lift cylinder lock-out valves. See Section 5.3 Lift
Cylinder Lock-Out Valves, page 30 .
3. Position floor jack (A) under frame leg (B).
4. Operate jack to raise wheel off ground.
5. Place blocks or a stand under frame leg (B).
6. Remove wheel bolts and remove wheel.
Figure 8.141
169456
213
Rev. D