MacDon R85 Rotary Disc 16 Foot Pull-Type - Manual (Page 113)

OPERATING THE MOWER CONDITIONER
Installing Tall Crop Feed Plates: Driveline Deflector LH End
1. Remove the four bolts (A) that secure the driveline (B)
and disc to the spindle.
2. Rotate the deflector (C) as required so that large
opening in deflector faces you.
3. Remove the driveline (B) through the larger opening in
the deflector.
Figure 7.27: Clockwise rotation LH
driveline disc
4. Loosen the four bolts (A) in the two plates (B) that hold
the upper driveline shield (C) in place.
5. Move the plates (B) so that shield (C) can be lowered
into deflector (D).
6. Remove the deflector (D) and upper driveline
shield (C).
Figure 7.28
169456
103
Rev. D