MacDon R85 Rotary Disc 16 Foot Pull-Type - Manual (Page 229)

TROUBLESHOOTING
Symptom Problem Solution Section
Material being
pulled out by roots
when cutting, tall
crop leaning into
machine. Crop in conditioner
rolls before crop is
cut.
Insufficient roll gap.
Increase roll gap.
7.2.2 Adjusting the Roll Gap,
page 89
Damaged leaves
and broken stems.
Roll timing off. Check roll timing and adjust if
necessary. 7.4.1 Checking the Roll Timing,
page 91
and 7.4.2 Adjusting the
Roll Timing, page 92
Excessive crimping. Increase roll gap. 7.2.2 Adjusting the Roll Gap,
page 89
Excessive drying
or bleaching of
crop.
Windrow too wide and
thin. Adjust forming shields. 7.5.3 Adjusting the Swath Baffle,
page 95
169456
219
Rev. D