MacDon HC10 for D-Series User Manual
Hc10 hay conditioner for d-series draper headers
Table of contents
Document Outline
- toc
- Introduction
- Serial Numbers
- 1Safety
- 2General Information
- 3Unloading and Assembly
- 3.1Unloading the Hay Conditioner
- 3.2Preparing the Header
- 3.3Installing the Rock Grate
- 3.4Installing Deck Brackets
- 3.5Installing the Feed Deck
- 3.6Installing the Conditioner
- 3.7Attaching Hydraulics
- 3.8Assembling the Forming Shield
- 3.9Installing the Forming Shield
- 3.10Attaching to a Windrower
- 3.11Lubricating the Conditioner
- 3.12Performing Predelivery Checks
- 4Operation
- 4.1Owner/Operator Responsibilities
- 4.2Operational Safety
- 4.3Attaching Hay Conditioner to Header
- 4.4Detaching Hay Conditioner from Header
- 4.5Detaching Feed Deck and Rock Grate
- 4.6Break-in Period
- 4.7Preseason Check
- 4.8Daily Startup Check
- 4.9Conditioner Operation
- 4.10Storage
- 5Maintenance
- 6Repair Parts
- 6.1Abbreviations
- 6.2Serial Number Breaks
- 6.3Lower Roll and Frame Assembly
- 6.4Upper Roll Assembly
- 6.5Cover and Supports
- 6.6Hydraulic Motor, Mounts, and Tensioner
- 6.7Belt Drive and Shield
- 6.8Hydraulic Completion Package
- 6.9Gears and Roll Coupling Assembly
- 6.10Forming Shields
- 6.11Feed Deck and Pan
- 6.12Mounting Brackets
- Model HC10 Hay Conditioner Predelivery Checklist
- Introduction
- tables
- Table 2.1 SAE Grade 5 Bolt and Grade 5 Free Spinning
- Table 2.2 SAE Grade 5 Bolt and Grade 5 Distorted Thread Nut
- Table 2.3 SAE Grade 8 Bolt and Grade 8 Distorted Thread Nut
- Table 2.4 SAE Grade 8 Bolt and Grade 8 Free SpinningNut
- Table 2.5 Metric Class 8.8 Bolts and Class 9 Free Spinning Nut
- Table 2.6 Metric Class 8.8 Bolts and Class 9 Distorted Thread Nut
- Table 2.7 Metric Class 10.9 Bolts and Class 10 Free Spinning Nut
- Table 2.8 Metric Class 10.9 Bolts and Class 10 Distorted Thread Nut
- Table 2.9 Metric Bolt Bolting into Cast Aluminum
- Table 2.10 Flare-Type Hydraulic Tube Fittings
- Table 2.11 O-Ring Boss (ORB) Hydraulic Fittings (Adjustable)
- Table 2.12 O-Ring Face Seal (ORFS) Hydraulic Fittings
- Table 5.1 Service Intervals
- Table 5.2 Maintenance Record