MacDon HC10 for D-Series - Manual (Page 51)

UNLOADING AND ASSEMBLY
15. Install L-pin (A) through arm and bracket on conditioner
and lock into place. (Rotate pins to align key-hole slot).
Repeat for other arm.
Figure 3.34
16. Install 5/8 in. x 1-1/2 in. carriage bolt (A) in the
right-hand lower attachment location.
Figure 3.35: RH Side Shown
17. Install 5/8 in. x 1-1/2 in. carriage bolt (A) in the
left-hand lower attachment location.
Figure 3.36: LH Side Shown
169254
43
Rev. D