MacDon HC10 for D-Series - Manual (Page 38)

UNLOADING AND ASSEMBLY
To unload the hay conditioner, follow these steps:
1. Remove hauler's tie down straps and chains.
2. Use forklift to lift each of the three pallets of hay
conditioner components off of the trailer deck.
3. Back up until unit clears trailer and slowly lower to 6
inches (150 mm) from ground.
4. Take to storage or set-up area.
5. Set pallet down securely on level ground.
6. Check for shipping damage and missing parts.
Figure 3.3: Forming Shield Bundle #4800
169254
30
Rev. D