MacDon HC10 for D-Series - Manual (Page 94)

OPERATION
4.10 Storage
At the end of each operating season, follow these steps:
1. Clean the conditioner thoroughly.
CAUTION
Never use gasoline, naphtha, or any volatile material for cleaning purposes. These materials may be
toxic and/or flammable.
2. Store in a dry, protected place if possible. If stored outside, always cover conditioner with a waterproof canvas
or other protective material.
3. Repaint all worn or chipped painted surfaces to prevent rust.
4. Loosen drive belt.
5. Lubricate the conditioner thoroughly, leaving excess grease on fittings to keep moisture out of bearings. Apply
grease to exposed threads, and sliding surfaces of components.
6. Check for worn components and repair.
7. Check for broken components and order replacement from your dealer. Attention to these items right away will
save time and effort at beginning of next season.
8. Replace or tighten any missing or loose hardware. Refer to section Torque Specifications .
169254
86
Rev. D