MacDon HC10 for D-Series - Manual (Page 46)

UNLOADING AND ASSEMBLY
5. Carefully lower the windrower lift legs until lugs (A) on
conditioner are seated in the U-shaped brackets (B)
on header.
6. Ensure the conditioner is seated properly in the
brackets, and then remove the chains.
Figure 3.19
7. Install 5/8 in. x 1-1/2 in. carriage bolt (A) in the
right-hand lower attachment location.
Figure 3.20: RH Side Shown
8. Install 5/8 in. x 1-1/2 in. carriage bolt (A) in the
left-hand lower attachment location.
Figure 3.21: LH Side Shown
169254
38
Rev. D