8maintenance schedule, Table 5.1 service intervals, Maintenance schedule – MacDon HC10 for D-Series User Manual
Page 110: Important, Caution, 8 maintenance schedule
5.8
Maintenance Schedule
The following maintenance schedule is a listing of periodic maintenance procedures, organized by service intervals.
Regular maintenance is the best insurance against early wear and untimely breakdowns. Following this schedule
will increase machine life. For detailed instructions, refer to the specific headings in this manual. Use the lubricant
specified in section
Service Intervals: The recommended service intervals are in hours of operation. Where a service interval is given
in more than one time frame, e.g., "100 hours or Annually", service the machine at whichever interval is reached first.
IMPORTANT
Recommended intervals are for average conditions. Service the machine more often if operated under
adverse conditions (severe dust, extra heavy loads, etc.).
CAUTION
Carefully follow safety messages given under section
5.1 Preparation for Servicing, page 87
and section
5.2 Recommended Safety Procedures, page 88
Table 5.1 Service Intervals
Interval
Service
First use
Refer to section
10 hours or daily
Check hydraulic hoses and lines.
50 hours
Grease roll shaft bearings.
Grease feed deck drive and idler roller bearings.
100 hours or annually
9
Check roll drive belt tension.
End of season
Refer to section
.
9.
It is recommended that annual maintenance be done prior to the start of the operating season.
169254
102
Rev. D