MacDon HC10 for D-Series - Manual (Page 50)

UNLOADING AND ASSEMBLY
10. Remove the stand (A), and store with hairpin (B)
in toolbox.
11. Lift the conditioner, and position into the header
opening from the rear.
Figure 3.31
12. Carefully lower the windrower lift legs until lugs (A) on
conditioner are seated in the U-shaped brackets (B)
on header.
13. Ensure the conditioner is seated properly in the
brackets before you disconnect from windrower.
Figure 3.32
14. Lift latch (B) to release conditioner lift arm (A), and fold
up to storage position on conditioner.
Figure 3.33
169254
42
Rev. D