MacDon HC10 for D-Series - Manual (Page 75)

OPERATION
4. Remove the two lynch pins (A) securing forming shield
to header pins and remove the forming shield.
Figure 4.4
5. Disconnect the five hydraulic hoses between the
conditioner and the header.
Figure 4.5
A - Conditioner Motor Pressure
Hose B - Deck Motor Return Hose
C - Case Drain Hose D - Deck Motor Pressure Hose
E - Conditioner Motor Return
Hose
6. Remove the two carriage bolts (A) that attach
conditioner to header.
Figure 4.6: RH Side Shown
169254
67
Rev. D