MacDon HC10 for D-Series - Manual (Page 78)

OPERATION
15. Remove L-pins (A) from lift arms and back tractor away
from conditioner.
16. Replace L-pins in conditioner lift arms.
Figure 4.13
4.4.2 Detaching Hay Conditioner: Lifting Method
CAUTION
To prevent accidental movement of windrower,
shut off engine, engage parking brake, and
remove key.
To detach the hay conditioner from the header using the
lifting method, follow these steps:
1. Disconnect straps (A) from tractor frame.
Figure 4.14
2. Lower header stand (A) to mid-position.
3. Detach header from windrower. Refer to windrower
operator’s manual for instructions.
Figure 4.15
169254
70
Rev. D