Opticon PHL 8000 User Manual
Page 58
Opticon
PHL 8000 series
User Manual
58
Table 3-16. Control Center Icons
Icon
Item & Function
Information Tab:
• Provides the software version, MAC address, Bluetooth ID,
serial number and configuration number.
LCD Brightness
• LCD Brightness: Allows you to adjust the brightness of the
LCD backlight. There are 5 levels. Set the LCD brightness
by adjusting the slider from low to high.
• Battery power, and device is idle for more than the specified
number of seconds. Options are 15 seconds, 30 seconds, 1
minute, 2 minutes, and 5 minutes. The default is 2 minutes.
• External power, and device is idle for more than the
specified number of seconds. Options are 15 seconds, 30
seconds, 1 minute, 2 minutes, and 5 minutes. The default is
2 minutes.
• Enable keypad brightness: When selected, this enables
keypad brightness.
Fn-Key Settings
Fn Key The Default Application Program
F1
Internet
Explorer
F2
Microsoft
WordPad
F3
Control
Center
F4
My
Computer
F5
Barcode Settings
(Only for PHL 8200)
F6
Media Player
(Only for PHL 8200)
F7
Backup Restore
(Only for PHL 8200)
F8
Inbox
(Only
for
PHL
8200)
To assign your favorite application program to Hot Keys:
• Choose one of the Hot Keys from the pull-down list. (See
Figure 3-47: Fn key settings: Select a function key.)
• Tap
Browse… inside the Assign program applet.
• Select one application program you want from the program
list; choose OK.) See Figure 3-48: Fn key settings: Select an
application.)
• Tap
Default to return to the default setting.