Opticon PHL 8000 - Manual (Page 48)

Opticon
PHL 8000 series
User Manual
48
2.5.2. Resuming
Use one of following methods to resume (wake up the PDT):
• Press the key to suspend or resume (wake up).
• Put the PDT into a dock.
When a battery pack completely discharges while the unit is in suspend mode, the
PDT remains suspended until the discharged battery condition is corrected.
2.6. Resetting the PDT
2.6.1. Soft (Warm) Reset
A warm reset is a transition from the on, idle, or suspend power state that closes
all applications and clears the working RAM, but preserves the file system.
Reason for a Warm Reset: If an application “hangs,” initiate a warm reset to
terminate the application only.
Process for a Warm Reset: Press the Reset button on the back of the PDT.
After a Warm Reset:
• The desktop appears with the application shortcuts on the screen.
• The custom settings in the registry are persistent.
2.6.2. Hard (Cold) Reset
1. You can use a Cold Reset to initiate the device if WINCE.NET OS locks up or
Warm Reset does not work
2. To perform a Cold Reset, press the Power button on the front and the Reset
button on the back simultaneously.
3. The device will reboot after a Cold Reset.
CAUTION: It is best to use only the warm reset. Try a warm reset before you
initiate a cold reset. All applications will be closed and working RAM and all files
will be cleared if you initiate a cold reset. Before a cold reset, back up your files to
Flash ROM, Flash Card, or PC.