beautypg.com

Opticon PHL 8000 User Manual

Page 24

background image

Opticon

PHL 8000 series

User Manual




24

2.2. Charging the Battery Pack

Before using the PDT, charge the battery pack.

Charge time: The initial charge cycle for the battery pack is approximately 6 hours.
Subsequent charging cycles are approximately 4 hours.

When charging the battery pack, the charging LED indicator on the PDT turns

Red

.

After the battery pack is fully charged, the charging LED indicator turns

Green

.

CAUTION

: Once you have charged the battery pack and backup battery and started

using the PDT, do not leave the battery pack out of the PDT for too long, or any unsaved
data will be lost. Power the PDT off if you want to change the main battery pack.

2.2.1.

Installing the Battery Pack

a) Release the hand strap

Figure 2-7: Release the hand strap