Opticon PHL 8000 - Manual (Page 39)

Opticon
PHL 8000 series
User Manual
39
Main Tab
Figure 2-20: Main tab
• Enable/Disable Radio: When the radio is enabled, selecting this button
disables it; when the radio is disabled, selecting this button enables it.
• Active Profile: You can view the name of the active profile and, using the
selection list, select a different profile. If you select ThirdPartyConfig
then, after the device goes through a power cycle, WZC is used for
configuration of the radio.
• Status: Indicates the radio’s status.
• Radio Type: Indicates the type of radio in the device. “BG” means a
Summit radio that supports 802.11b and 802.11g.
• Regulatory Domain: Indicates the regulatory domain or domains for
which the radio is configured. “Worldwide” means that the radio can be
used in any domain. The domain cannot be configured by an administrator
or user.
• Driver: Indicates the version of the device driver that is running on the
device.
• SCU: Indicates the version of SCU that is running on the device.
• About SCU: When tapped, supplies information on SCU that on a
Windows application normally would appear under Help > About.