Lenze ECSCExxx Power supply module - Manual (Page 65)

Commissioning
Commissioning steps (overview)
Control via digital inputs
6
l
65 EDBCSXE040 EN 7.0
6.1.3 Control via digital inputs
)
Note!
Follow the commissioning steps in the given order!
Setting Brief description Detailed
information
Initial state:
l Basic settings completed.
l C0001 = 1
^ 62
1. Set input X6/DI2 to HIGH. Output X6/DO1 is set to HIGH when the module
is ready for operation.
2. Set input X6/DI1 to HIGH. Charging process is started.
After some seconds the earth−fault test is complete and the DC bus is charged.
The power supply module is now ready for operation (status word 1 / bit 0 = 1 (
¶ 96)).