Emergency, Assign dimmers as emergency loads, Stations – ETC SmartPack v2.1.0 User Manual
Page 18: Emergency stations, N o t e
14
SmartPack User Manual
Emergency
SmartPack is provided with a emergency contact input. When an active emergency contact
is received all non-emergency dimmers in the SmartPack are forced off while all user-
selected emergency dimmers energize to full.
During an emergency the LCD will display a message advising the “Emergency Input Is
Active” and the menu will lock-out all ability to access the system. After normal power is
restored, the SmartPack will restore to the configured DMX Loss Behavior mode.
“DMX Loss Behavior” on page 11.
Assign Dimmers as Emergency Loads
Step 1:
Scroll to Emergency, press .
Step 2:
Scroll to [Assign Dimmer], press .
Step 3:
Use + or - to scroll the dimmer list. Press to select a dimmer.
Step 4:
Use + or - to scroll “In Emergency” [Yes] or [No], press .
Step 5:
Press < to return to the previous menu or << to return to the main menu.
Stations
A SmartPack dimming pack, with a SmartLink LinkPower supply (S-LPS) installed or an
external SmartLink Station Power Supply, facilitates the communication of host messages
for host messages) between SmartPack dimmer packs and the use of
SmartLink stations.
N o t e :
A SmartLink LinkPower supply is limited to four SmartLink stations. Alternatively,
you may have up to 16 SmartLink stations when using a SmartLink Station Power
Module (S-SPM). You are limited to four SmartLink host products in a SmartLink
system.
One SmartLink host product (SmartPack, SmartSwitch, Unison DRd with
SmartLink or Sensor + with SmartLink) in the system must have a LinkPower
Supply or Station Power Module installed for wall station power.
Preset 5
Preset 1
Preset 2
Preset 4
Preset 3
Preset 10
Preset 6
Preset 7
Preset 9
Preset 8
Preset 5
Preset 1
Preset 2
Preset 4
Preset 3
Preset 5
Preset 1
Preset 2
Preset 4
Preset 3
Belden 8471
plus (1) #14 ground
Presets, Sequences, Sequence Timing
SmartLink ATC
Back
Up
Enter
Recall
Preset
Hold
Down
SmartLink
LinkPower
Supply
SmartPack
SmartSwitch
DRd 12 with SmartLink
SmartSwitch 48
DMX