ETC SmartPack v2.1.0 - Manual (Page 14)

10 SmartPack User Manual
Advanced Menu Structure
Enter the Advanced menu from the Normal Menu:
The Advanced menu provides all access to the menu and configuration settings for the
SmartPack.
Step 1: Scroll to General Settings, press .
Step 2: Scroll to Menu Mode, press
Step 3: Scroll to Advanced Menu, press and hold for 5 seconds. The display will
return to the main menu when the Advanced Menu has been accessed.
• If the is released prematurely the menu will remain in Normal Menu
mode.
DMX
DMX Start Address
The start address range is determined by the size of your SmartPack. When a DMX Start
Address is selected as the active DMX Mode, the DMX range will be displayed on the LCD.
DMX Start Address range
• A three channel unit allows a start address range of 001-510.
• A six channel unit allows a start address range of 001-507.
• A twelve channel unit allows a start address range of 001-501.
Step 1: Scroll to DMX, press .
Step 2: Scroll to DMX Start Address, press .
Step 3: Use + or - to increment or decrement the Start Address range. Press to set the
address and return to the previous menu.
Step 4: Press < to return to the previous menu or press << to return to the main menu.
The specified DMX range will display on the LCD.
DMX Patch
DMX Patch allows the user to patch different DMX numbers to selected dimmers. This
menu is to be used when setting the DMX Start Address is not sufficient. When DMX Patch
is selected as the active DMX Mode, “DMX Patch” will be displayed on the LCD.
Step 1: Scroll to DMX, press .
Step 2: Scroll to DMX Patch, press .
Step 3: Use + or - to increase dimmer channel. Dimmers will be numbered 1-6 or 1-12
depending on the SmartPack channel count. Initially the DMX address will patch
consecutively with the dimmer channel. If the DMX address should differ from the
channel number, press .
DMX: 001 > 012
Level:
DMX Patch
Level: