AirLive AirMax5 - Manual (Page 96)

6. Command Line Interface
89 AirLive AirMax5 User’s Manual
„ set client isolation
‰
Command> set client isolation disable
solation disable successful!
„ et operation mode
‰
‰
xample:
mode AP
Operation mode is already setting!
System should be reboot...
„
e:
> set lan ping enable
„ k> gw dns
‰ , and DNS
‰
2.168.1.1 sm 255.255.255.0 gw 192.168.1.254 dns
ress : 192.168.1.1
set log level 7 successful
‰ Purpose: Enable or Disable client isolation / privacy seperator
Example:
Set client i
s
wds_bridge | wisp | router>
Purpose: set or change operation mode
E
Command> set operation
Command> set operation mode wds_bridge
Are you sure ? ( y/n ) : y
set
‰ Purpose: enable/disable ping response or web server on the lan/wan side
Exampl ‰
Command
set lan ping already enable
set lan ip sm
Purpose: set LAN IP address such as IP, Subnet mask, gateway
server
Example:
Command> set lan ip 19
168.95.1.1
killall: dnsmasq: no process killed
LAN IP add