AirLive AirMax5 - Manual (Page 85)

6. Command Line Interface
AirLive AirMax5 User’s Manual 78
In this chapter, we will explain commands that are available through Telnet or SSH
interface. We will provide descriptions for the commands, example settings and the
AirMax5’s response. The purpose for this chapter is to introduce available CLI commands
only. For detail descriptions on the concept and application of the settings, please refer to
chapter 4 and chapter 5.
Before reading this chapter, please go through Section 3.3 of Chapter 3. It contains
information on how to login Telnet or SSH/SSH2 interface. For quick reference, the login
and password is as bellowed:
„
Telnet
‰ Password: airlive
„
SSH/SSH2
‰ First login
z Login: root
z Password:
‰ Second login:
z Password: airlive
When you change AirMax5’s password, it will change the second login’s password
only.
You can get a list of available commands by typing “help” at the command prompt.
You must remember to save the configurations by typing “save
config” at the command prompt after making changes, otherwise, the
configuration will be lost after reboot.
6.1 System Commands
„ ping >
‰ Purpose: to ping a remote IP address
‰ Example:
Command> ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1): 56 data bytes
64 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=1.8 ms
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.0 ms
6
6.
Command Line Interface
This is the command
Here explains the usage
of the command
Example
command and
response