AirLive AirMax5 - Manual (Page 22)

2. Install the AirMax5
15 AirLive AirMax5 User’s Manual
2.6 LED Table
This section describes the LED behavior of AirMax5. For more information on how to use
the LED for antenna alignment, please refer to Chapter 5: How to make Antenna Alignment
for details.
You can find the LED on the left side of the AirMax5.
Power
Steady Red – Normal Operation
OFF – No Power
Link
Steady Yellow: Link is active
Flashing Yellow: Transmit or receive data
OFF: No connection
WLAN Signal Strength LEDs
Weak :Low signal strength
Strong :Better signal strength
Weak + Strong: Full Signal strength
No connection/Bad signal strength
2.7 Restore Settings to Default
If you have forgotten your AirMax5’s IP address or password, you can restore your AirMax5
to the default settings by pressing on the “reset button” for more than 5 seconds. The
reset button is inside the bottom case. Please see diagram below for details.