AirLive AirMax5 - Manual (Page 90)

6. Command Line Interface
83 AirLive AirMax5 User’s Manual
„
‰ ether SNMP is enable or disabled
‰ Example:
p
„
‰
‰
ommand> show trap manager
Trap Manager IP Address Status
--------------------------------------------------------------------
„ cters>
‰ e assigned name
‰
Command> show trap manager airlive
tatus
---------------
bled
„
‰
‰
P/Port
-----------------------------------
Primary Disabled 0.0.0.0/1812
0.0.0.0/1812
„ ary>
‰ primary or secondary radius server
‰
ius server primary
show snmp
Purpose: Show wh
Command> show snm
SNMP is enabled
show trap manager
Purpose: Show SNMP Trap manager status
Example:
C
ailrive 192.168.1.123 enabled
show trap manager
Purpose: Show SNMP Trap manager status with th
Example:
Trap Manager IP Address S
-----------------------------------------------------
ailrive 192.168.1.123 ena
show radius server
Purpose: Show radius server settings
Example:
Command> show radius server
RADIUS Server State I
-----------------------------------------------------
Secondary Disabled
RADIUS Server reattempt: 60 seconds
show radius server
ettings of
ary | second
Purpose: Show s
Example:
Command> show rad