AirLive AirMax5 - Manual (Page 37)

4. Web Management-Wireless and WAN Settings
AirLive AirMax5 User’s Manual 30
this menu for this chapter.
„ System Configuration: All settings besides Wireless and WAN functions are in
this category. The system configuration including changing password, upload
firmware, backup configuration, settings PING watchdog, and setting management
interface. We will talk about this menu’s function in Chapter 5.
„ Device Status: This section for monitoring the status of AirMax5. It provides
information on device status, Ethernet status, wireless status, wireless client table,
and system log.
„ Logout: Please make sure to Logout after you finish all settings.
4.2 Operation Modes (Wireless and WAN Settings)
The wireless settings of AirMax5 are dependant on the wireless operation mode you
choose. Therefore, the first step is to choose the operation mode. For explanation on
when to use what operation mode, please refer to Chapter 1.
When you select “Wireless Settings” in the welcome screen, or click on the “Operation
Mode” on the top menu; the following screen will appear:
Configure Wireless and WAN Settings
This tells you what
is the Current
Operation Mode
Select one of the
wireless operation
modes here
After you select the new
operation mode, click
here to Change.
„ Mode: The available wireless operation modes for AirMax5. Select one and click
on “Change Mode” button to switch between modes..
„ Setup: Click here to configure the Wireless and WAN(in router mode) settings.