AirLive AirMax5 - Manual (Page 78)

5. Web Management2: System Configuration and Status
71 AirLive AirMax5 User’s Manual
Syslog server IP address: System event messages generated by the wireless access
point will be sent to a Syslog daemon running on a server identified by this IP address
5.1.5 SNMP Settings
System Configuration -> SNMP Settings
This screen allows you to configure SNMP parameters including the system name, the
location and contact information.
„ System Name: A name that you assign to your 802.11a+g Router. It is an
alphanumeric string of up to 30 characters.
„ System Location: Enter a system location.
„
System Contact: Contact information for the system administrator responsible for
managing the AirMax5. It is an alphanumeric string of up to 60 characters.
„ Community String For Read: If you intend the router to be managed from a remote
SNMP management station, you need to configure a read-only “community string” for
read-only operation. The community string is an alphanumeric string of up to 15
characters.
„
Community String For Write: For read-write operation, you need to configure a write
“community string”.