Installing the airmax5, 1 before you start – AirLive AirMax5 User Manual
Page 14
2. Install the AirMax5
7
AirLive AirMax5 User’s Manual
2
2.
Installing the AirMax5
This section describes the hardware features and the hardware installation procedure for
the AIRMAX5. For software configuration, please go to chapter 3 for more details.
2.1 Before You Start
It is important to read through this section before you install the AirMax5
The AirMax5 comes with everything you need to start installation with exception
of the PoE Ethernet Cable. You can use a good quality CAT-5E outdoor graded
Ethernet cable (shielded with anti-UV) according to the length you need.
The AirMax5 must be installed in the upright position if the unit is located in
outdoor or wet environments.
You must set the distance parameter to make long distance connection work.
Please refer to chapter 4 of this user’s guide for details.
The integrated antenna has forward coverage angle of 30 degree both in vertical
and horizontal direction.
The AirMax5 is a 5GHz CPE device only, it can not operate in 2.4GHz.