Brother MFC 6890CDW - Manual (Page 19)

10
2
Loading paper and
other print media
2
Note
• For Tray #2, see Loading paper in paper
tray #2 on page 13.
• If the tray used for Fax mode is set to
Auto Select you should open and close
the scanner cover to reset the machine
after refilling paper tray #1.
• When you load a different size of paper in
Tray #1 or Tray #2, you will need to
change the paper size setting in the
machine at the same time. (See Paper
Size and Type on page 29.)
Loading paper in paper
tray #1
2
a
If the paper support flap is open, close it,
and then close the paper support. Pull
the paper tray completely out of the
machine.
Note
• When you are using A3, Legal or Ledger
size paper, press and hold the universal
guide release button (1) as you slide out
the front of the paper tray.
• If you are using A5 or smaller size paper,
make sure that the paper tray is not
extended.
b
Open the paper tray cover (1).
Loading paper and documents
2
1 1
1