Brother MFC 6890CDW - Manual (Page 181)

172
Network
(Continued)
Wired LAN
(Continued)
TCP/IP
(Continued)
IPv6 On
Off *
Enable or
Disable the IPv6
protocol. If you
want to use the
IPv6 protocol,
visit
http://solutions.
brother.com for
more information.
Ethernet — Auto *
100B-FD
100B-HD
10B-FD
10B-HD
Chooses the
Ethernet link
mode.
WLAN TCP/IP BOOT Method Auto *
Static
RARP
BOOTP
DHCP
Chooses the
BOOT method
that best suits
your needs.
IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP
address.
Subnet Mask [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet
mask.
Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the
Gateway
address.
Node Name BRWXXXXXXXXXXXX Enter the Node
name.
WINS Config Auto *
Static
Chooses the
WINS
configuration
mode.
WINS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP
address of the
primary or
secondary
server.
Level1 Level2 Level3 Level4 Options Descriptions
See Network User's Guide on the CD-ROM
The factory settings are shown in Bold with an asterisk.