Brother MFC 6890CDW - Manual (Page 128)

119
13
13
Printing photos
directly from a
PictBridge camera
13
Your Brother machine supports the
PictBridge standard, allowing you to connect
to and print photos directly from any
PictBridge compatible digital camera.
If your camera is using the USB Mass
Storage standard, you can also print photos
from a digital camera without PictBridge.
(See Printing photos directly from a digital
camera (without PictBridge) on page 121.)
PictBridge requirements
13
To avoid errors, remember the following
points:
The machine and the digital camera must
be connected using a suitable USB cable.
The image file extension must be .JPG
(other image file extensions like .JPEG,
.TIF, .GIF and so on will not be
recognized).
PhotoCapture Center™ operations are
not available when using the PictBridge
feature.
Setting your digital camera
13
Make sure your camera is in PictBridge
mode. Some of the settings listed below may
not be available for your PictBridge
compatible digital camera.
1
See DPOF printing on page 120 for more details.
2
If your camera is set to use the Printer Settings
(Default setting), the machine will print your photo
using the following settings.
Printing photos from a camera
13
Camera Menu
Selections Options
Paper Size Ledger, A3, Letter, A4,
10
×15cm, Printer Settings
(Default setting)
2
Paper Type Plain Paper, Glossy Paper,
Inkjet Paper, Printer Settings
(Default setting)
2
Layout Borderless: On, Borderless:
Off, Printer Settings (Default
setting)
2
DPOF setting
1 -
Print Quality Normal, Fine,
Printer Settings (Default
setting)
2
Color
Enhancement On, Off,
Printer Settings (Default
setting)
2
Date Print On, Off,
Printer Settings (Default
setting)
2