Eppendorf R Series 48R CO2 Incubator - Manual (Page 42)

42
CO48R-0050 Š Galaxy R Series 48 R Personal Size CO
2
Incubator User’s Guide
8 8 A A
P P P P E E N N D D I I X X
A A : : O O
P P T T I I O O N N S S
8.1 Options
Some option combinations are not possible, others may incur extra cost. Please inquire
before ordering.
Options NBS Part Number
Field
Retrofitable?
High Temperature Disinfection CO170R-1000 No
O
2
Control, 1-19% CO170R-0200 No
O
2
Control, 0.1-19% P0628-5410 No
O
2
Control, 1-195% P0628-5400 No
Cooling System P0628-6810 No
4 Split Inner Glass Door P0628-6780 Yes
8 Split Inner Glass Door P0628-6781 Yes
Copper Chamber P0628-5612 No
Humidity Package P0628-6820 No
BMS Relay P0628-5540 Yes
IP66 Power Receptacle P0628-5612 No
8.2 High Temperature Disinfection
The High Temperature Disinfection option is designed to heat the internal chamber to
120°C, maintain that temperature for 4 hours, and then allow the chamber to cool down
to 37°C or the programmed temperature (if different from 37°C) when normal control
takes over. The cycle is designed to disinfect all internal surfaces and components with
the exception of the Oxygen control sensor where supplied.
1. The incubator should be cleaned, disinfectd chemically and dried thoroughly before
starting the cycle (follow the instructions for Cleaning in Section 5).
2. The black protective cover must be removed before starting a cycle (the white
porous cover can remain in place). The shelves, shelf racks, humidity tray and
silicone rubber suction cups should all be in place during the cycle. If the Humidity
Tray Warning Option is fitted, ensure the sensor is placed on the bottom shelf prior
to starting the cycle. This is to protect the sensor from the direct heat at the bottom
of the incubator. The incubator MUST be clean and dry, and the humidity tray
MUST be empty, clean and dry, to continue. If it is not, permanent damage can
occur to the incubator that may void your warranty.