Eppendorf R Series 48R CO2 Incubator - Manual (Page 13)

13
New Brunswick Scientific User’s Guide
2 2 U U
N N P P A A C C K K I I N N G G
& & I I
N N S S T T A A L L L L A A T T I I O O N N
2.1 Inspection of Boxes
After you have received your order from New Brunswick Scientific, inspect the boxes
carefully for any damage that may have occurred during shipping. Report any damage
to the carrier and to your local NBS Sales Order Department or distributor immediately.
2.2 Unpacking
CRUSH WARNING!
At least two people are required to safely lift your 48 R.
Disassemble the wooden shipping crate and remove the protective packing. Save the
packing materials for possible future use, and be sure to save this User’s Guide for
instruction and reference.
To simplify lifting the incubator, leave it on the pallet. You must have at least one
person at either side to safely lift the incubator. Supported by the base only, remove the
incubator by lifting it from the delivery pallet.
Locate and remove the parts stored in the Humidity Tray.
If any part of your order was damaged during shipping, is missing, or fails to operate,
please fill out Customer Satisfaction Form 6300 (packed in the envelope with your
warranty card) and return it by fax or mail. You can also call New Brunswick
Scientific’s or your distributor’s service department.
Using your NBS packing list, verify that you have received the correct materials and
that nothing is missing.
Table 1 on the following page outlines the accessory items that are supplied with your
new incubator: