Apple Newton Programmer’s Newton 2.0 (for Newton 2.0) - Manual (Page 865)

C H A P T E R 2 4
Built-in Communications Tools
Modem Tool 24-7
Table 24-4 Summary of modem options
Label Value Use When Description
kCMOModemPrefs "mpre" Any time Configures the modem
controller.
kCMOModemProfile "mpro" Any time Override modem setup
selected in preferences. Use
when instatiating.
kCMOModemECType "mecp" Any time Specifies the type of error
control protocol to be used in
the modem connection.
kCMOModemDialing "mdo" Any time Controls the parameters
associated with dialing.
kCMOModemConnectType "mcto" Any time Configures the modem
endpoint for the type of
connection desired (voice,
fax, data, or cellular data).
kCMOModemConnectSpeed "mspd" After
connecting Read-only option indicating
modem-to-modem raw
connection speed.
kCMOModemFaxCapabilities "mfax" After bind,
before
connecting Read-only option indicating
the fax service class
capabilities and modem
modulation capabilities.
kCMOModemFaxEnabledCaps "mfec" Any time Determines or sets which
fax and modem capabilities
are enabled.
This option is available
only for System Software
version 2.1 or later.
kCMOModemVoiceSupport "mvso" After bind,
before
connecting Read-only option indicating if
the modem supports line
current sense (LCS).
kCMOMNPSpeedNegotiation "mnpn" Any time Sets MNP data rate speed.
kCMOMNPCompression "mnpc" Before
connecting Sets the data compression
type.
kCMOMNPStatistics "mnps" After
connecting Read-only option reporting
performance statistics from
the current MNP connection.